| INJECTION UNIT | item | unit | WMK-1180S | ||
| A | B | C | |||
| screw diameter | mm | 110 | 120 | 130 | |
| screw L/D ratio | L/D | 22 | 20.2 | 18.6 | |
| theoretical shot size | cm3 |
4619 |
5500 | 6452 | |
| injection weight | g | 4203 | 5005 | 5871 | |
| Injection rate | g/s | 785 | 930 | 1010 | |
| Plasticizing capacity | g/s |
150 |
173 | 192 | |
| Injection pressure | Mpa |
174 |
146 | 125 | |
| Screw speed | rpm | 0-110 | |||
| CLAMPING UNIT | Clamp force | KN | 11800 | ||
| Space between tie bars | mm | 1150*1100 | |||
| Toggle stroke | mm | 1200 | |||
| Max. mold height | mm | 1200 | |||
| Min. mold height | mm | 500 | |||
| Ejector stroke | mm | 320 | |||
| Ejector tonnage | KN | 215 | |||
| Ejector number | p | 21 | |||
| OTHERS | Max.pump pressure | Mpa |
16 | ||
| Pump motor power | KW |
45+45 | |||
| Heater power | KW | 68 | |||
| Machine dimension | m |
12*2.8*3.3 | |||
| Machine weight | t | 56 | |||
